6WINDGate™ WEBGate - Services: NAT: Edit Static Translation

6WINDGate™ WEBGate Configuration

admin Logout

System
     General setup
     ARP and NDP
     Update Firmware
Interfaces
     Assign role
      eth0_0 (lan)
      eth1_0 (lan)
      eth2_0 (lan)
     Dynamic interfaces
Firewall
     Rules
Services
     DNS forwarder
     Dynamic DNS
     SNMP
     IPv4 DHCP Relay
     IPv4 DHCP Server
     IPv6 DHCP Client
     IPv6 DHCP Server
     IPv6 Mobility
     NAT & NAT-PT
     PPP Server
     PPPoE Server
     L2TP Server
     AAA
VPN
     IPsec
     Certificates
     VPN Templates
Migration
     Xin4
     6to4
     Xin6
     DSTM
     ISATAP
Routing
     Static Routes
     RIP
     RIPng
     OSPF
     BGP
     ISIS
     PIM-SMv4
     PIM-SMv6
Logs
     Log Sessions
     Log Services
     Show Log Sessions
Status
     System
     Show Status
     Interfaces
     Show Route
     DHCP leases
     IPsec SA/SPD
     Ping
     Backup/Restore
     Reboot system

Services: NAT: Edit Static Translation

Id	ID for NAT static translation
Protocol	Set the protocol for NAT static translation
Passthrough (If checked, packets of specified protocol are not changed)
Public Address	Set public address for address mapping. e.g 192.168.1.5
Public Port	Port number for public address (port number is from 1 to 65535)
Private Address Passthrough
Private Address	Set private address for address mapping. e.g 192.168.1.10
Private Port	Port number for private address - optional (port number is from 1 to 65535)