6WIND WEBGate - RIP: General Setup

6WINDGate™ WEBGate Configuration

admin Logout

System
     General setup
     ARP and NDP
     Update Firmware
Interfaces
     Assign role
      eth0_0 (lan)
      eth1_0 (lan)
      eth2_0 (lan)
     Dynamic interfaces
Firewall
     Rules
Services
     DNS forwarder
     Dynamic DNS
     SNMP
     IPv4 DHCP Relay
     IPv4 DHCP Server
     IPv6 DHCP Client
     IPv6 DHCP Server
     IPv6 Mobility
     NAT & NAT-PT
     PPP Server
     PPPoE Server
     L2TP Server
     AAA
VPN
     IPsec
     Certificates
     VPN Templates
Migration
     Xin4
     6to4
     Xin6
     DSTM
     ISATAP
Routing
     Static Routes
     RIP
     RIPng
     OSPF
     BGP
     ISIS
     PIM-SMv4
     PIM-SMv6
Logs
     Log Sessions
     Log Services
     Show Log Sessions
Status
     System
     Show Status
     Interfaces
     Show Route
     DHCP leases
     IPsec SA/SPD
     Ping
     Backup/Restore
     Reboot system

RIP: General Setup

The configuration has been changed.
You must apply the changes in order for them to take effect.

Enable RIP
Distance	RIP Administrative distance e.g. 1 to 255
Default metric	Set of metric of redistributed route. e.g. 1 to 16
Redistribute	Connected Kernel Static BGP OSPF IS-IS Dep
RIP Extended Split-Horizon	Enable Extend split horizon to redistributed routes
RIP Version	Set RIP version. Blank means keep default behaviour
RIPv1 Ingress-Summary	Disable RIPv1 Ingress-Summary classful reception
RIPv1 Border-Gateway	Disable RIPv1 Border-Gateway classful emission
Default information	Distribute default route

Timers

Table Update	Routing table update timer value in seconds. e.g 0 to 65535
Information Timeout	Routing information timer value in seconds. e.g 0 to 65535
Garbage Collection	Garbage collection timer value in seconds. e.g. 0 to 65535

Network

Network

Interface Properties

RIP interface

Passive interface

Passive interface

Static route

Static route

Neighbor

Neighbor address