6WIND WEBGate - RIP: General Setup

6WINDGate™ WEBGate Configuration

admin Logout

System
     General setup
     ARP and NDP
     Update Firmware
Interfaces
     Assign role
      eth0_0 (lan)
      eth1_0 (lan)
      eth2_0 (lan)
     Dynamic interfaces
Firewall
     Rules
Services
     DNS forwarder
     Dynamic DNS
     SNMP
     IPv4 DHCP Relay
     IPv4 DHCP Server
     IPv6 DHCP Client
     IPv6 DHCP Server
     IPv6 Mobility
     NAT & NAT-PT
     PPP Server
     PPPoE Server
     L2TP Server
     AAA
VPN
     IPsec
     Certificates
     VPN Templates
Migration
     Xin4
     6to4
     Xin6
     DSTM
     ISATAP
Routing
     Static Routes
     RIP
     RIPng
     OSPF
     BGP
     ISIS
     PIM-SMv4
     PIM-SMv6
Logs
     Log Sessions
     Log Services
     Show Log Sessions
Status
     System
     Show Status
     Interfaces
     Show Route
     DHCP leases
     IPsec SA/SPD
     Ping
     Backup/Restore
     Reboot system

PIM-SMv4: General Setup

The configuration has been changed.
You must apply the changes in order for them to take effect.

Reverse Path Forwarding

RPF	Choose Reverse Path Forwarding.

RP Candidate

	candidate for RP election
Interface	Interface for candidate RP advertisements. e.g.eth1, eth2, ...
Priority	RP candidate priority. Default value is 0 (highest prioirty).

BSR Candidate

	candidate for BSR election
Interface	Interface for candidate BSR advertisements. e.g.eth1, eth2, ...
Priority	BSR candidate priority. Default value is 0 (lowest priority).

Threshold

Data

Rate:

Interval:

Specifies the threshold that a last hop router switches to a shortest path tree.
The default value of rate and interval are 50000 (bits/s) and 20, respectively.

Rate:

Interval:

Specifies the threshold that a RP switches to a shortest path tree.
The default value of rate and interval are 50000 (bits/s) and 20, respectively.

Networks

Interface	threshold

Multicast Group

Multicast group

Static RP

Address	multicast group	priority